Ammonia decomposition furnace is a commonly used chemical reaction device, which decomposes ammonia into nitrogen and hydrogen by electric heating to obtain high-purity nitrogen and hydrogen.Application example of vacuum heat treatment technology in mold Ammonia, the most commonly used nitrogen compound, is a flammable gas that is flammable and burns rapidly in air. The ammonia decomposition furnace decomposes ammonia by electric heating, and decomposes it into nitrogen and hydrogen to obtain high-purity nitrogen and hydrogen.Powder Metallurgy Gear Manufacturing Process The ammonia decomposition furnace is usually composed of a heating tube and a separating tube. After the ammonia in the heating tube is heated, the ammonia molecules break to form nitrogen and hydrogen, and then enter the separation tube from the heating tube, and the nitrogen and hydrogen in the separation tube are separated to obtain high-purity nitrogen and hydrogen.Vacuum Furnaces Leaks and Detection Techniques The use of ammonia decomposition furnace needs to pay attention to the following points: First, it is necessary to check the state of the heating tube and separation tube to ensure their integrity to avoid accidents. Secondly, the concentration of ammonia needs to be checked to ensure the normal operation of the ammonia decomposition furnace. Finally, when operating the ammonia decomposition furnace, you should pay attention to safety measures to avoid accidents.Process optimization of alumina ceramic sintering technology